- Research
- Open access
- Published:
Geometric interpretation of Blundon’s inequality and Ciamberlini’s inequality
Journal of Inequalities and Applications volume 2014, Article number: 381 (2014)
Abstract
In this paper, we present a geometric interpretation of Blundon’s inequality and Ciamberlini’s inequality. Our results provide a useful method for proving the inequalities concerning sides, circumradius, and inradius of a triangle. As applications, some improved inequalities are established to illustrate the effectiveness of the proposed method.
MSC: 26D15, 26D05.
1 Introduction
Blundon’s inequality states that, for any triangle with the circumradius R, the inradius r, and the semiperimeter s, it is true that (see [1])
The equality occurs in the left-side inequality if and only if the triangle is either equilateral or isosceles, having the vertex angle greater than ; the equality occurs in the right-side inequality if and only if the triangle is either equilateral or isosceles, having the vertex angle less than .
Blundon’s inequality expresses the necessary and sufficient conditions for the existence of a triangle with elements s, R, and r. In many references this inequality is called the fundamental triangle inequality.
Another fundamental inequality, related to non-obtuse triangle (or non-acute triangle), is known in the literature as Ciamberlini’s inequality (see [2]). This inequality claims that, for any non-obtuse triangle, the inequality
holds true; inequality (2) is reverse for any non-acute triangle. The equality occurs in (2) if and only if the triangle is a right triangle.
Blundon’s inequality and Ciamberlini’s inequality have many applications in Euclidean geometry, particularly in the field of geometric inequalities. For more details we refer the reader to [3–8] and the references cited therein.
The main purpose of this paper is to present a geometric interpretation of Blundon’s inequality and Ciamberlini’s inequality. Also, we show some interesting applications of our results. This paper is organized as follows. Section 2 describes a geometric interpretation of Blundon’s inequality and Ciamberlini’s inequality. Section 3 gives some remarks on the geometric interpretation of Blundon’s inequality and Ciamberlini’s inequality, we display how to use the geometric interpretation of these inequalities to prove some geometric inequalities. Finally, Section 4 illustrates the applications of the results given in Section 2, some classical geometric inequalities such as Leuenberger’s inequality, Walker’s inequality, and Finsler-Hadwiger’s inequality are improved. Moreover, an open problem proposed by Huang in [9] is also solved.
2 Geometric interpretation of Blundon’s inequality and Ciamberlini’s inequality
Theorem 1 Let be a triangle with circumcircle ⊙O and incircle ⊙I, and let R, r, and s be the circumradius, inradius, and semiperimeter of the triangle, respectively. Then
-
(i)
there exists an isosceles with vertex angle which inscribes the circumcircle ⊙O, and which satisfies
(3)where , , and are the circumradius, inradius, and the semiperimeter of , respectively;
-
(ii)
there exists an isosceles with vertex angle which inscribes the circumcircle ⊙O and satisfies
(4)where , , and are the circumradius, inradius, and the semiperimeter of , respectively.
Proof (i) As shown in the diagram (see Figure 1), we construct an isosceles , inscribing the circumcircle ⊙O, such that the vertex angle satisfies
Since and have common circumcircle ⊙O, we conclude that
Next, we prove that the inradius of isosceles is equal to the inradius of .
By the law of sines we find that the congruent side lengths of is
Thus, we obtain
Substituting into the above expression, it follows that
Finally, we shall verify that the semiperimeter of isosceles satisfies .
Since
and
we get
Applying the left-side Blundon’s inequality (1) yields
This proves the first part of Theorem 1.
(ii) By using the same method as in part (i) above, we construct an isosceles , inscribing the circumcircle ⊙O (see Figure 2), such that the vertex angle satisfies
Then we have
and
Substituting into the above expression, it follows that
Next, we need to verify that the semiperimeter of isosceles satisfies .
From
and
we deduce that
Using the right-side Blundon’s inequality (1) leads to
The second part of Theorem 1 is proved. □
Theorem 2 Let be a non-obtuse triangle with circumcircle ⊙O and incircle ⊙I, and let R, r, and s be the circumradius, inradius, and semiperimeter of the triangle, respectively.
-
(i)
If , then there exists an isosceles with vertex angle which inscribes the circumcircle ⊙O and satisfies
(5)where , , and are the circumradius, inradius, and the semiperimeter of , respectively.
-
(ii)
If , then there exists a right triangle with an acute angle which inscribes the circumcircle ⊙O and satisfies
(6)where , , and are the circumradius, inradius, and the semiperimeter of , respectively.
Proof The assertion in part (i) of Theorem 2 can be proved by using the same method as in the proof of Theorem 1, part (i), above.
We will now prove part (ii) of Theorem 2.
According to the assumption , we can construct a right triangle inscribing the circumcircle ⊙O (see Figure 3), such that an acute angle satisfies
Since and have common circumcircle ⊙O, we conclude that
It is easily observed that
So, we have
Now, from
it follows that
Next, we verify that .
In , we have
Using Ciamberlini’s inequality (2) for non-obtuse triangles
we obtain
The proof of Theorem 2 is completed. □
Theorem 3 Let be a non-acute triangle with circumcircle ⊙O and incircle ⊙I, and let R, r, and s be the circumradius, inradius, and semiperimeter of the triangle, respectively. Then there exists a right triangle with an acute angle which inscribes the circumcircle ⊙O and satisfies
where , , and are the circumradius, inradius, and the semiperimeter of , respectively.
Proof Note that in any non-acute triangle we have the inequality (see [3])
This enables us to construct a right triangle , inscribing the circumcircle ⊙O (see Figure 4), such that an acute angle satisfies
By using methods similar to those of Theorem 2, part (ii) together with an application of Ciamberlini’s inequality for non-acute triangles, we can deduce that
which implies the desired results of Theorem 3. □
3 Remarks on geometric interpretation of Blundon’s inequality, and Ciamberlini’s inequality
The results of Theorems 1, 2 and 3 provide a useful method to prove the inequalities for triangles.
Remark 1 The result of Theorem 1 implies that:
-
(i)
In order to prove the validity of the inequality
(8)for any triangle, it is sufficient to prove that inequality (8) is valid for the isosceles triangles with the vertex angle greater than or equal to .
-
(ii)
In order to prove the validity of the inequality
(9)for any triangle, it is sufficient to prove that inequality (9) is valid for the isosceles triangles with the vertex angle less than or equal to .
Remark 2 The result of Theorem 2 implies that, in order to prove the validity of the inequality
for any non-obtuse triangle, it is sufficient to prove that inequality (10) is valid for the isosceles triangles with the vertex angle greater than or equal to in the case when , and inequality (10) is valid for the right triangles in the case when .
Remark 3 The result of Theorem 3 implies that, in order to prove the validity of the inequality
for any non-acute triangle, it is sufficient to prove that inequality (11) is valid for the right triangles.
Remark 4 If the inequality under consideration is homogeneous with respect to R, r, and s, in order to convenient for computing, we may assume that the side lengths of the isosceles triangles in the form of
where for the case of vertex angle of isosceles triangles are greater than or equal to ; and for the case of vertex angle of isosceles triangles is less than or equal to .
It is easily observed that the function , is strictly increasing. So, , , which are the side lengths constituting isosceles triangles.
Furthermore, the semiperimeter s, the inradius r, and circumradius R of the triangle can be calculated by the following formulas:
Remark 5 If the inequality under consideration is homogeneous with respect to R, r, and s, in order to convenient for computing, we may assume that the side lengths of the right triangles are in the form of
where .
It is easy to see that the function , is strictly decreasing, thus . It follows from and that a, b, c are the side lengths constituting right triangles.
Furthermore, the semiperimeter s, the inradius r, and circumradius R of the triangle can be calculated by the expressions below:
4 Some applications
In this section we illustrate the applications of the results given in Section 2. Based on these results, we establish some sharp geometric inequalities, which improves some classical geometric inequalities.
In [10], Blundon asked for the proof of the inequality
which holds in any triangle . The solution given by the editors was in fact a comment made by Makowski [11], who refers the reader to [1], where Blundon originally published this inequality.
We establish a sharpened version of inequality (15), as follows.
Proposition 1 In any we have the inequality
where the constant is best possible, that is, it cannot be replaced by larger numbers.
Proof By using Theorem 1, in order to prove that inequality (16) holds for any triangle, it is enough to prove that inequality (16) holds for the isosceles triangle. In view of inequality (16) being homogeneous with respect to R, r, and s, we may assume the side lengths of the triangle as
where . Further, the semiperimeter s, inradius r, and the circumradius R of the triangle can be formulated as follows:
Note that inequality (16) is equivalent to
Substituting x for s, r, R in (17) gives
We conclude that inequality (17) is valid, and thus inequality (16) is valid.
We next prove that the constant is best possible in the strong sense.
Consider inequality (16) in a general form as
Putting
and
in (18), we get
Therefore, the best possible value for k in (18) is . This completes the proof of Proposition 1. □
Half a century ago, F Leuenberger proved the following inequality (see [4]):
Huang [9] considered the improved version of (19) and proposed the following.
Open problem Find the largest constant k such that
holds for any triangle .
Some results related to the above Open problem were given by Shi [12], Chen [13], and Chen [14], respectively, as follows:
The above results show that inequality (20) is valid for . This prompts us to ask a natural question: What is the largest constant k such that inequality (20) holds true? The following proposition gives a perfect answer to this question.
Proposition 2 In any we have the inequality
where the constant is best possible, that is, it cannot be replaced by larger numbers.
Proof By using the identity (see [3])
it follows that inequality (24) is equivalent to the following inequality:
It is obvious that inequality (25) can be transformed to the form
By using Theorem 1, in order to prove that inequality (25) holds for any triangle, it is enough to prove that inequality (25) holds for the isosceles triangle. Note that inequality (25) is homogeneous with respect to R, r, and s, we may assume the side lengths of the triangle as
where . Then the semiperimeter s, inradius r, and the circumradius R of the triangle can be calculated as follows:
Substituting x for s, r, R in (25) gives
The inequality (25) is proved, we thus conclude that inequality (24) is valid.
Next, we need to show that the constant is best possible in the strong sense.
Consider inequality (24) in a general form as
Choosing
in (26), one has
Thus, the best possible values for k in (26) is . The proof of Proposition 2 is completed. □
In [15], Walker presented a celebrated inequality for non-obtuse triangles, i.e.,
Inequality (27) is known in the literature as Walker’s inequality. We establish a sharpened version of inequality (27), as follows.
Proposition 3 In any non-obtuse we have the inequality
where the constant 2 is best possible, that is, it cannot be replaced by larger numbers.
Proof By making use of Theorem 2, in order to prove the validity of inequality (28) for any non-obtuse triangle, it is sufficient to prove that inequality (28) is valid for the isosceles triangles in the case when , and inequality (28) is valid for the right triangles in the case when .
We rewrite inequality (28) in an equivalent form, by transferring all the terms to the left
Let us consider the following two cases.
Case 1. .
By the homogeneity of inequality (29) with respect to R, r, and s, we may assume the side lengths of the isosceles triangle as
The semiperimeter s, inradius r, and circumradius R of the triangle can be expressed by
Moreover, the assumption implies that
Direct computation gives
Therefore, inequality (29) is valid for the isosceles triangles under the assumption of .
Case 2. .
In view of the homogeneity of inequality (29) with respect to R, r, and s, we may assume the side lengths of the right triangle as
where . The semiperimeter s, inradius r, and circumradius R of the triangle can be expressed by
Thus, we have
Hence, inequality (29) is valid for the right triangles under the assumption of .
By combining Cases 1 and 2, we deduce from Theorem 2 that inequality (28) holds true for arbitrary non-obtuse triangles.
We next prove that the constant 2 in (28) is best possible in the strong sense.
Consider inequality (28) in a general form as
Putting
and
in (30), we get
Therefore, the best possible values for k in (30) is . The proof of Proposition 3 is completed. □
In [16] and [17], Finsler and Hadwiger proved the following inequality:
where a, b, c are the side lengths of a triangle, F is the area, and
Here, we establish an improved Finsler-Hadwiger inequality for non-obtuse triangles.
Proposition 4 In any non-obtuse we have the inequality
where a, b, c are the sides lengths of a triangle, F is the area of the triangle. The constant is best possible, that is, it cannot be replaced by smaller numbers.
Proof By using the identities (see [3])
it follows that inequality (32) is equivalent to
It is easy to see that inequality (33) can be equivalently transformed to the form of
By making use of Theorem 2, in order to prove the validity of inequality (33) for any non-obtuse triangle, it is sufficient to prove that inequality (33) is valid for the isosceles triangles in the case when , and inequality (33) is valid for the right triangles in the case when .
We consider the following two cases.
Case 1. .
By the homogeneity of inequality (33) with respect to R, r, and s, we may assume the side lengths of the isosceles triangle as
The semiperimeter s, inradius r, and circumradius R of the triangle can be expressed by
Moreover, the assumption implies that
Direct computation gives
Hence, inequality (33) is valid for the isosceles triangles under the assumption of .
Case 2. .
In view of the homogeneity of inequality (33) with respect to R, r, and s, we may assume the side lengths of the right triangle as
where . The semiperimeter s, inradius r, and circumradius R of the triangle can be expressed by
Thus, we have
We conclude that , that is, inequality (33) is valid for the right triangles under the assumption of .
By combining Cases 1 and 2, we deduce from Theorem 2 that inequality (32) holds true for arbitrary non-obtuse triangles.
Finally, we need to prove that the constant in (32) is best possible in the strong sense.
Consider inequality (32) in a general form as
Putting
into (34), we get
Therefore, the best possible values for k in (34) is that . This completes the proof of Proposition 4. □
References
Blundon WJ: Inequalities associated with the triangle. Can. Math. Bull. 1965, 8: 615-626. 10.4153/CMB-1965-044-9
Ciamberlini C: Sulla condizione necessaria e sufficiente affinchè un triangolo sia acutangolo, rettangolo o ottusangolo. Boll. Unione Mat. Ital. 1943, 5: 37-41.
Mitrinović DS, Pečarić JE, Volenec V: Recent Advances in Geometric Inequalities. Kluwer Academic, Dordrecht; 1989.
Bottema O, Djordjević RZ, Janić RR, Mitrinović DS, Vasić PM: Geometric Inequalities. Wolters-Noordhoff, Groningen; 1969.
Shan Z: Geometric Inequalities in China. Jiangsu Educational Publishing House, Nanjing; 1996. (in Chinese)
Yang XZ: Research in Inequalities. Tibet People’s Press, Lhasa; 2000. (in Chinese)
Wu S: A sharpened version of the fundamental triangle inequality. Math. Inequal. Appl. 2008, 11(3):477-482.
Wu S, Bencze M: An equivalent form of the fundamental triangle inequality and its applications. J. Inequal. Pure Appl. Math. 2009., 10(1): Article ID 16
Huang XL: Remark on a geometric inequality. Fujian Middle School Math. 1993., 14(6): Article ID 11 (in Chinese)
Blundon WJ: Problem E1935. Am. Math. Mon. 1966, 73: 1122. 10.2307/2314658
Makowski A: Solution of the Problem E1935. Am. Math. Mon. 1968, 75: 404. 10.2307/2313443
Shi SC: Sharpening of a geometric inequality. Fujian Middle School Math. 1993., 14(4): Article ID 7 (in Chinese)
Chen J: On a geometric inequality. Fujian Middle School Math. 1993., 14(6): Article ID 10 (in Chinese)
Chen Q: Sharpening on a Geometric Inequality, Forward Position of Elementary Mathematics. Jiangsu Educational Publishing House, Nanjing; 1996. (in Chinese)
Walker AW: Problem E2388. Am. Math. Mon. 1972, 79: 1135. 10.2307/2317439
Hadwiger H: Ergänzungen zu zwei Defizitformeln des Dreiecks. Jahresber. Dtsch. Math.-Ver. 1939, 49: 35-39.
Finsler P, Hadwiger H: Einige Relationen im Dreieck. Comment. Math. Helv. 1937, 10(1):316-326. 10.1007/BF01214300
Acknowledgements
This research was supported by the Natural Science Foundation of China under Grants 11371125 and 61374086, the Natural Science Foundation of Hunan Province under Grant 14JJ2127, the Natural Science Foundation of Zhejiang Province under Grant LY13A010004, the Natural Science Foundation of Fujian province under Grant 2012J01014 and the Foundation of Scientific Research Project of Fujian Province Education Department under Grant JK2012049.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no conflicts of interest to this work.
Authors’ contributions
SW finished the proof and the writing work. YC gave SW some advice on the proof and writing. All authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0), which permits use, duplication, adaptation, distribution, and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Wu, SH., Chu, YM. Geometric interpretation of Blundon’s inequality and Ciamberlini’s inequality. J Inequal Appl 2014, 381 (2014). https://doi.org/10.1186/1029-242X-2014-381
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1029-242X-2014-381